TRADING DIVISION

/TRADING DIVISION
TRADING DIVISION 2018-10-10T07:17:51+00:00

HYDRAULIC EQUIPMENTS AND ACCESSORIES

We are stockist and dealers of hydraulic jacks and cylinder capacity from 3 ton up to 5000 ton capacity. We do develop customer made jacks/cylinders. The range of pumps includes hand pumps and electric power packs for double acting and single acting cylinders/jacks.
HYDRAULIC EQUIPMENTS AND ACCESSORIES
SINGLE ACTING JACKS LOAD RETURN (APEX JACKS) 
Sr. Capacity Ton Stroke mm Outer Dia mm Piston Dia mm Bore Dia mm Closed Height mm Weight Kgs. Working Pressure Bar
1 500 150 450 290 300 410 506 700
2 1000 150 620 410 420 460 1082 700
3 1500 150 775 520 530 680 2508 700
4 2000 150 900 590 600 795 3960 700
** Tilting Saddle provided on all jacks to avoid the eccentric load.
           
ELECTRIC POWER PACK MODELS
Sr Valve Action Motor size Pressure rating Bar Output Flow Rate L/Min. Model Number
  Lift – Hold – Retrace HP   –   Kw I Stage -II stage I stage  –   II stage  
1              *        *          * 7.5  –   5.5 100      –   700 11.7      –   3.7 APP1x4
2              *        *          * 5.0  –   3.7 100      –   700 ——     –   2.6 APP1x2
DOUBLE ACTING JACKS LOAD RETURN (APEX JACKS)
Double acting jacks made from special alloy to reduce the weight and designed with latest technology to reduce the specifications of jack. Details are as below:
Sr. Capacity Ton Stroke mm Outer Dia mm Piston Dia mm Bore Dia mm Closed Height mm Weight Kgs. Working Pressure Bar
1 500 150 340 230 300 400 260 700
2 750 150 340 230 370 400 390 700
3 1000 150 475 350 420 400 520 700
4 1500 150 610 470 530 405 930 700
5 2000 150 685 540 600 410 1130 700
4 5000 150 1110 850 950 430 3100 700
All Jacks are equipped with stroke limiter and swivel pad.
        
ELECTRIC POWER PACK MODELS
Sr Valve Action Motor size Pressure rating Bar Output Flow Rate L/Min. Model Number
  Lift – Hold – Retrace HP   –   Kw I Stage -II stage I stage  –   II stage  
1           *        *          * 7.5  –   5.5 100      –   700 11.7      –   3.7 APP1x2D
** Power pack is suitable to operate up to 2 jacks of 2000 Ton capacity simultaneously.
GENERAL HYDRAULIC JACKS, PUMPS AND OTHER ACCESSORIES
          
Product range includes:

  • Telescopic Cylinders (10 Ton to 30 Ton)
  • Single Acting cylinder – Spring Return (5 Ton to 200 Ton)
  • Low Height flat cylinders – Spring Return (5 Ton to 200 Ton)
  • Double Acting Hollow cylinders (10 Ton to 500 Ton)
  • Double Acting pullpac cylinders (10 Ton to 100 Ton)
  • Single and two stage hand pumps for cylinders.
  • High pressure thermoplastic hoses
  • Pressure gauges
  • 4 way directional control valves
  • H – Frame Presses (10 Ton to 100 Ton)
  • Hydraulic Flange spreaders (5 Ton to 10 Ton)
  • Hydraulic Cutters
  • Hydraulic Pullers
  • Hydraulic crimping tools
  • Hydraulic Torque Wrench (Flange/cassette type)
For further details ask for complete catalogue.

APEX CENTRIFUGAL DEWATERING PUMP

SPECIFICATION AND PERFORMANCE
AIR COOLED DEUTZ THREE-CYLINDER DIESEL ENGINE, 34 HP, 2000 RPM, WITH FUEL TANK CAPACITY OF 200 LTR.  Vacuum pump for automatic PRIMING & REPRIMING at 70 CFM. Carbon ceramic special mechanical seal for long life when used for sandy seawater.
Main Components Suction & Discharge
Volute SG/Cast Iron/316 SS
Impeller Bronze
Shaft 316 SS
Suction Flange: 150 mm PN16
Discharge Flange: 150 mm PN16
Quick acting coupling optional
Pump Performance Chasis
Max. Head     50 m 4 wheel site trailer
Max. Flow      400 m³/Hour Weight
Max. Solid      50 mm
Suction Head  9 mtr
1072 Kgs.

APEX PISTON PUMP

SPECIFICATION AND PERFORMANCE
AIR COOLED ZEN TWO-CYLINDER DIESEL ENGINE, 13.5 HP, 1800 RPM, WITH FUEL TANK CAPACITY OF 100 LTR.
Main Components Suction & Discharge
Liner 316 SS
Piston Collar Leather
Shaft 316 SS
Suction Flange: 150 mm PN16
Discharge Flange: 150 mm PN16
Quick acting coupling optional
Pump Performance Chasis
Max. Suction Head – 9.0 m Skid Mounted
Max Delivery Head – 27 m Weight
Max. Discharge Capacity – 100 m³/Hour
Piston Type – Double Acting
1175 Kgs
** SPECIALLY DESIGNED PISTON PUMPS WITH CANOPY FOR SOUNDPROOF OPERATION.

APEX SUBMERSIBLE PUMP

MODEL CODE
100 AS N 2 5.5
Discharge mm Pume Type Impeller Type Pole KW
SPECIFICATION
Discharge mm 80 100-150
Pumping Liquid Liquid Temprature 0~40
Liquid Nature Sandy~Waste water
Max Depth 30m
Pump Structure Impeller Open Enclosed
Mech. Seal Double Mechnical Seal
Bearing Ball type bearing
Material Out cover SUS304
Upper cover FC200
Casing FC200
impeller HCR
Wear ring HCR
Mech. seal Sic./Sic.
Moter Type Dry moter
Pole 2P
Insulation F
Frequency~Phase 50Hz.3Θ
Protector Auto cut
Material Frame FC200
Shaft SUS420J2
Cable HVCT
FEATURES
  • Specifically Deigned for civil engineering application for heavy duty, light weight, top outlet required
  • double outer casing and water water cooled moter design extremely appropriate for low water level and extended operation application.
  • Specila designed high efficient and wear resistant HCR (High Crome) impeller.
  • Multi impeller design suitable form high head with small capacity to low head with large capacity of application requirment (H: high, N: normal, L: large).
  • Complete stainless steel outer cover of AS5.5~7.5kW exceptional consolidation design weight less then 80kg of light weight structure and diameter 286mm of miniature outlook.
  • Optional discharge connection (hose,flange and thread connection)
APPLICATION
  • Civil engineering-tunneling and ground works de watering.
  • dewatering of fluid contain solid sediment
  • easy of mobilityfor use contractors- installers and service industries.
PERFORMANCE CURVE
PERFORMANCE SPEC.
Hz Model Power
HP(kW)
Discharge
Inch(mm)
Phase
Θ
Start
method
Head
m
Capacity
m³/min
Max Head
m
Weight
kg
Solid passage
mm
dimension(mm)
width*hight
50 80ASH25.5 7.5(5.5) 3″(80) 3 Direct 28 0.5 37 74 10 286*661
100ASN25.5 7.5(5.5) 4″(100) 3 Direct 19 1.0 29 76 10 286*661
100ASN27.5 10(7.5) 4″(100) 3 Direct 25 1.0 39 78 10 286*661
150ASL25.5 7.5(5.5) 6″(150) 3 Direct 12 1.5 25 78 10 286*723
150ASL27.5 10(7.5) 6″(150) 3 Direct 16 1.5 30 80 10 286*723

DEWATERING ACCESSORIES

We do keep stock of complete dewatering accessories for “Miller Type” & “Bauer Type” Product range covers size from 3” to 8”.
Miller Type/Bauer Type
  • 3” M+F Coupling set, Gal.
  • 6” M+F Coupling set, Gal.
  • 3” 90° Elbow, Gal
  • 6” 90° Elbow,Gal
  • 3” 45° Elbow, Gal
  • 6” 45° Elbow,Gal
  • 3” Y – Joint, Gal
  • 6” Y – Joint,Gal
  • 3” T- Joint, Gal
  • 6” T- Joint,Gal
  • 3” M+F End cap set
  • 6” M+F End cap set
  • 3” O-ring
  • 6”O-ring
  • 4” M+F coupling set, Gal
  • 8” M+F coupling set, Gal
  • 4” 90° Elbow, Gal
  • 8” 90° Elbow,Gal
  • 4” 45° Elbow, Gal
  • 8” 45° Elbow,Gal
  • 4” Y- Joint, Gal
  • 8” Y- Joint,Gal
  • 4” T – Joint, Gal
  • 8” T – Joint,Gal
  • 4” M+F End cap set
  • 8” M+F End cap set
  • 4” O-ring
  • 8”O-ring
  • 4” x 6m Discharge pipe w/o Mushrooms with end coupling, Gal,W.T.2.2 mm
  • 6” x 6m Header pipe with mushroom with end coupling, Gal, W.T. 2.2mm
  • 6” x 6 m Discharge pipe w/o mushroom with end coupling, Gal, W.T.2.2 mm

Suction and Discharge hoses

Suction hose in sizes 3”,4” & 6”
Sr. Description Size Packing size Origin
1 3” Suction hose W.P. 10 Bar 3” 40 m roll Italy
2 4” Suction hose W.P. 10 Bar 4” 40 m roll Italy
3 6” Suction hose W.P. 10 Bar 6” 30 m roll Italy
Discharge Hose (Heavy Duty)
Sr. Description Weight Packing size Origin
1 3” Discharge hose W.P. 4 Bar 75 Kg 100 m roll Greece
2 4” Discharge hose W.P. 4 Bar 95 Kg 100 m roll Greece
3 6” Discharge hose W.P. 4 Bar 140 Kg 100 m roll Greece
4 8” Discharge hose W.P. 4 Bar 220 Kg 100 m roll Greece

General other accessories for dewatering operations

  • 3” Brass non-return valves
  • 3” King nipples
  • 6” Brass Gate Valves
  • 6” Pipe menders
  • 8” Pipe menders
  • 3” PVC connectors
  • Waterproof electrical joints
  • Waterproof cable 6mm 4 core full gauge
  • Jubliee Clips 2”, 3”, 4”, 6” and 8”
  • Denso tape
  • Strainer Gal.
  • Swing hose 50 mm dia

Strand Anchors

General Information :
The anchors are structural elements, which are capable of transmitting stress to the ground by means of structures and anchoring devices.
These consist in a particular application of pre-stress in the field civil engineering and their most common applications can be found in the anchoring of face walls.
P.C. Strand wire – ASTM A416/A416M-98 grade 270 with below specifications:
Nominal diameter
Mm             In
Nominal steel area
mm²
Nominal weight
Kg/1000 m
Min. breaking
Load KN
Min. Yield
15.24            0.6 140.0 1102 260.7 234.6
Chemical composition (%)
Heat no. C Si Mn P S Cr Ni
X 41839 0.84 0.19 0.76 0.013 0.005 0.22 0.02
         Packing Reel-less coils of   2.7 MT to 3.5 MT
Coil  (ID  / OD / Width) 800 / 1300 / 750 mm

Anchor Heads and Wedges

Mono anchor head
Sr. MODEL HEIGHT DIAMETER
1 A45-34 51 mm 45 mm
Multi anchor heads for 15.24 mm size strand
Anchor head specification:
SR. DESCRIPTION THICKNESS DIAMETER
1 Anchor head 3 hole 60 mm 115 mm
2 Anchor head 4 hole 60 mm 115 mm
3 Anchor head 5 hole 60 mm 115 mm
4 Anchor head 6 hole 60 mm 135 mm
5 Anchor head 7 hole 60 mm 135 mm
6 Anchor head 8 hole 60 mm 170 mm
7 Anchor head 12 hole 60 mm 185 mm
8 Anchor head 16 hole 60 mm 185 mm
Wedges
Wedges 15.24 mm three piece wedges.

Origin: GERMAN.

MULTI STRESSING JACK SET

Multi stressing jack which can cater from 2 strands to 9 strands by changing front head and tail head with use of different support plates, which are integral part of stressing jack.

CFRP stressing jack is latest innovation in stressing technology, lightweight and easy to use in sites without requirement of crane to hold the jack. Weight of jack is only 55 kgs.

Multi stressing jack’s graphical representation

MONO STRESSING JACK SET
Mono Stressing jacks with stroke 100 & 200 mm,

Origin: German

Mono-stressing jacks graphical representation of Load Vs. Pressure.

CROWN FOR STATIC LOAD TEST OF PILES

We do supply crown for pile load test with complete accessories. Range starts from 1000 ton to 3500 Ton capacities.
Static load test of 3270 Ton done at Conrad Hotel Project site at Shk. Zayed Road.

DIAL GAUGES AND MAGNETIC STANDS

We are stockist and distributor for “Mitutoyo” Japan brand dial gauges and magnetic stand. Details as below:
Measuring Range Graduation Code no. Scale Range / revolution Accuracy Hysteresis Measuring Force
10 mm 0.01 mm 20465 0-100 1 mm   +-13μm 5 μm <1.4
30 mm 0.01 mm 2330S-10 0-100 1 mm  +-25μm 7 μm <2.5
50 mm 0.01mm 3058F 0-100 1 mm +-35μm 9 μm <3.0

SOIL BUCKETS

DOUBLE BOTTOM SINGLE OPENING BUCKET TBDB-S Series
Product
code
Ø
(mm)
H
(mm)
h
(mm)
D
(mm)
d
(mm)
Teeth Teeth
Type*
Opening
Mechanism
TBDB-S  500 500 1600 1100 480 480 2 V 18 Manuel
TBDB-S  600 600 1600 1100 580 580 2 V 18 Manuel
TBDB-S  750 750 1600 1100 730 650 2 V 18 Automatic
TBDB-S  800 800 1600 1100 780 680 3 V 18 Automatic
TBDB-S  900 900 1600 1100 880 780 3 V 19 Automatic
TBDB-S1000 1000 1600 1100 980 880 3 V 19 Automatic
TBDB-S1200 1200 1600 1100 1180 1080 3 V 23 Automatic
DOUBLE BOTTOM DOUBLE OPENING BUCKET TBDB-D Series
Product
code
Ø
(mm)
H
(mm)
h
(mm)
D
(mm)
d
(mm)
Teeth Teeth*
type
Opening
Mechanism
TBDB-D 500 500 1600 1100 480 480 2+2 V 18 Manuel
TBDB-D 600 600 1600 1100 580 580 2+2 V 18 Manuel
TBDB-D 750 750 1600 1100 730 650 2+2 V 18 Automatic
TBDB-D 800 800 1600 1100 780 680 3+3 V 18 Automatic
TBDB-D 900 900 1600 1100 880 780 3+3 V 19 Automatic
TBDB-D 1000 1000 1600 1100 980 880 3+3 V 19 Automatic
TBDB-D 1200 1200 1600 1100 1180 1080 3+3 V 23 Automatic

SOIL AUGURS

SOIL AUGERS TAST Series
Product 
code

(mm)

(mm)

(mm)

(mm)
Flag # Teeth # Teeth 
Type*
TAST 500 500 480 1700 350 3 2+2 V 18
TAST 600 600 580 1700 350 3 2+2 V 18
TAST 750 750 730 1800 380 3 2+2 V 18
TAST 800 800 780 1800 380 3 3+3 V 18
TAST 900 900 880 1800 480 2 3+3 V 19
TAST 1000 1000 980 1800 480 2 3+3 V 19
TAST 1200 1200 1180 1900 520 2 4+4 V 23

ROCK AUGURS

BAUER TYPE ROCK AUGERS TART Series
Product
code
D
(mm)
d
(mm)
H
(mm)
p
(mm)
Flag # Bit Bit Type*
TART 500 500 480 1200 350 2 12 25
TART 600 600 580 1200 350 2 12 25
TART 750 750 730 1300 380 2 12 25
TART 800 800 780 1300 380 2 12 25
TART 900 900 880 1500 480 2 13 38
TART1000 1000 980 1500 480 2 13 38
TART1200 1200 1180 1600 520 2 15 38
HEAVY DUTY ROCK AUGERS THART Series
Product
code
D
(mm)
d
(mm)
H
(mm)
p
(mm)
Flag # Bits Bit Type*
THART500 500 480 1500 400 4 35 19
THART600 600 580 1500 400 4 35 19
THART750 750 730 1500 450 4 35 19
THART800 800 780 1500 450 4 35 25
THART900 900 880 1600 500 4 35 25
THART1000 1000 980 1600 500 4 35 25
THART1200 1200 1180 1700 525 4 39 25

TOOTH AND HOLDERS

We are stockist and distributor of tooth and holders, Round shank butter bit and holders and BFZ 80 carbide system. Details as below:
  • Conical teeth P-18TL [ESCO]
  • Conical holder P-18TL [ESCO]
  • Steel Pin 18PN [ESCO]
  • Rubber Lock 18LK [ESCO]
  • Conical teeth P-25TL [ESCO]
  • Conical holder P-25TL [ESCO]
  • Steel Pin 25PN [ESCO]
  • Rubber Lock 25LK [ESCO]
  • Bauer teeth BFZ 80 [carbide]
  • Conical holder BFZ 80
  • Round shank cutter bit 25 mm
  • Adopter for 25 mm
  • Round shank cutter bit 38 mm
  • Adopter for 38 mm

HEAVY DUTY DRIVE CHAIN LINKS

DIMENSION KEY

  • D – pin diameter
  • R – Roller diameter
  • G – Roller width
  • T – Sidebar thickness
  • L – Pin length
  • W – Sidebar width
  • P – Assembled Pitch
Chain no. Pitch
P
Inch
Sidebar
W
mm
Sidebar
T
mm
Pin
D
mm
Pin
L
mm
Roller
R
mm
Roller
G
mm
Breaking load
LB.
3067X 3.067 50.80 9.65 19.05 99.0 41.40 38.86 110,000
API 3P 3.075 39.62 9.65 16.51 95.76 31.75 37.34 75,000
E238R 3.5 57.15 12.7 22.23 113.79 44.45 36.58 150,000
API 4P 4.063 57.15 12.7 22.23 128.27 44.45 49.28 150,000
E4073 4.073 57.15 12.7 25.4 131.32 45.21 48.51 170,000

Load cells and read out unit

We are stockist and distributor of load cells from German, maximum capacity for load cells available is 1000 ton. Detail for the same with readout unit is as below:
Type PRE10000/0/120
Nominal capacity (FS) 0 – 10000 KN
Outside diameter (A) 189 mm
Bearing ring outside diameter (B) 153 mm
Bearing ring inside diameter (C) Without hole
Overall height (D) 120 mm
Measuring system Strain gauges
Precision 1% FS
Temperature error 0.01% /°C
Resolution 10 KN
Signal 3.3m V/V
Operating Temperature -30°C to +60°C
Cable TS-PUR/TAP47
READOUT UNIT
Type Indipoc μP1
Sensors Load cells Type PRE
Measuring range 600kN,1000kN,1500kN,2000kN,2500kN,3000kN
Resolution 1 kN
Precision Max. combined overall error ±0.2% ±1 digit incl. Temperature influence
Display LCD display, 4 digits
Power supply Batteries 9V (6×1.5V batteries, round cells LR6, UM3)
Protection Splash water resistant
Interface RS232 (Optional)
Temperature range -5°C to +45°C
Battery warnings In case of low battery capacity
Dimensions Approx. 260 x 200 x 80mm
Weight Approx. 2.5 kg (Icl. Case)
Accessories (Incl.) Carrying case, cables, batteies

Swage Machine

Rebar crimping machine with power pack unit
Description RebarǾ Coupler outer
Dia         mm
Coupler Length
mm
B S G 18 18 33 108
B S G 20 20 36 120
B S G 22 22 40 132
B S G 25 25 45 150
B S G 28 28 50 168
B S G 32 32 56 192
B S G 36 36 63 216
B S G 40 40 70 240

HERNAM PURE GHEE

Pure ghee
from Milk fat
Product of INDIA
Packing
1 Ltr. X 12 Tins = 1 Carton
2 Ltr. X 6 Tins = 1 Carton
1/2 Ltr. X 24 Tins = 1 Carton